![]() Solid wood floors are more affected by temperature and weather than engineered wood floors. When this occurs you may want to re-attach or secure the floor back down and apply a sealing compound to the flooring which helps prevent this type of problem.Įngineered wood floors v. Glued floors come loose or the nails pull loose. This expansion and contraction can result in the flooring coming loose from the subfloor. ![]() Also, sudden temperature or moisture/humidity changes will affect the expansion and contraction of the boards. Hardwood floors will usually shrink in the winter months and expand in the summer months. Then when walked on, the wood pieces rub against one another and you hear a creaking sound. When the boards or planks shrink, a thin gap or space occurs between the boards. When wood boards or planks dry out, they shrink. Since in reality it doesn’t take very long and is only a couple of dollars in screws, it’s worth having it in the contract. If you wait until the installers are putting the carpet down since it wasn’t part of the contract they may not want to do it or may want several hundred dollars more to do it. Request that this is part of the agreement. Screws will normally do a much better job of holding the subflooring down and will not work loose.īuyers Tip – if you’re going to add new carpeting…īefore you sign the contract for the new carpeting, ask the salesperson or contractor if they will take a few minutes and screw down any loose subfloor sheets before putting the new carpeting down. The majority of subflooring issues can be corrected by adding screws in the areas where the creaking is occurring. Occasionally, if the floor joists are spaced too far apart to properly support the sheathing, then floor creaking may occur. the second or third story of a home, the repair would typically be done by either removing the drywall from the ceiling under the creaking floor or pulling up the flooring and re-adhering it to the joists and/or correcting the blocking. If this is happening in a multilevel home ie. If this is the case and the home has a crawl space, it will usually allow access to the joist area and repairs or blocking can be easily made to the floor joists. This typically happens in homes with crawlspaces or in multilevel homes. If this blocking is not properly placed or missing, then it may allow the joists to move. Generally, floor joists are blocked every so many feet to help hold them in place and make sure that they don’t move. If a floor joist is cracked or damaged, then the nails holding the sheathing may work loose, thus creating a creaking sound. When this happens and the area is stepped on, it will flex downward (because the nail has pulled loose), and then back up, this creates a creaking sound.įloor joist damaged, cracked, or not blocked When this happens a gap will develop and the nails holding the floor will be slightly pulled loose. ![]() Over time the portions of the floor that have been sucked down will try to go back to a flat and level position. When nailed down, the sub-flooring will be sucked down unevenly. If the tops of the floor joists are not flat and level, then the sheets of plywood or sub-flooring will not be supported evenly. The subfloor, which may be constructed of plywood, wood planks/boards, OSB board, or particleboard is laid over floor joists that support the plywood or other sheathing. When walking across a carpeted floor and you hear a creaking sound, it is usually for one of the following reasons and can often be corrected easily.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |